Shrink Hood welded to pallet


Are used to protect pallets, mesh boxes and other containers. Pallet hoods, also known as covers, reliably protect against dirt, dust and moisture and prying eyes.

inquiry and information


Shrinking creates a solid container that does not slip during loading or transport. This means that the shrink-wrapped pallet can withstand certain lateral forces during transport. Recyclable and non-slip suitable for all pallet dimensions. In addition, your goods are stabilized and transported safely. High tear and puncture resistance are guaranteed.

We produce shrink covers for Euro pallets and disposable pallets, shrink covers for boxes and other protective covers in various sizes and thicknesses. On request, we can also produce your shrink hood in special sizes to suit your needs.

Shrink hoods can be placed over the load in one step and shrunk using heat. So-called shrink guns are commercially available for shrinking. The heat effect of the shrink gun causes the film material to contract and the hood hugs the product. An ideal distance from the gun to the hood is about 30 cm. The packaged goods under the shrink hood are not damaged by the heat.

Product data Shrink Hoods

MaterialsLDPE film, MDPE film, compound film (monoaxially shrinking film)
Surfacelubricated or non-slip
Width according to customer requirements
Lengthaccording to customer requirements
Strengthfrom 75 my to 250 my
Colourtransparent, coloured transparent, opaque
Printingflexographic printing, signature printing, embossed printing
Packagingindividually in a box
Types perforated, folded, with side gussets
Additional qualitiesanti-static, anti-blocking, anti-fog, meets food regulations, UV-resistant

We advise you competently on the solution of your packaging requirements and thus also contribute to highly efficient and thus cost-optimized packaging processes.

We process polyolefins such as high pressure (LDPE), medium pressure (MDPE), mixed films made of the aforementioned materials as well as polypropylene (PP) and various composite films. All raw materials and masterbatches we use are certified. A REACH declaration of conformity is available for each type of raw material. Every batch delivered has a batch certificate. These are managed and monitored in our quality management system. Depending on requirements and application, also via FDA approval.

An in-house quality assurance system ensures that all products can be tested and certified if required.

Our shrink hoods are environmentally friendly because they are 100% recyclable, rot-proof and neutral to groundwater. Polyethylene can be re-melted, i.e. it is completely recyclable and can therefore be reused in a different form. Our production waste is recycled in our own regenerated plant for reuse.

Items on stock bags:

ALU Flachbeutel Dreirandsiegelbeutel aus ALU-Verbundfolie 10.01348 St. 9201.750100µ
MDPEFlachbeutel natur transparent - ohne Zusätze - S.Schweissung - 10.010490 St. 7001.40075µ
MDPESeitenfalten-Beutel rot eingefärbt - mit Antistatikum - ohne Gleitmittel - mit Heissprägedruck - mit jeweils 100 mm eingelegter Seitenfalte - mit doppelter Bodenschweissung - 10.0154.700 St. 550690100µ
MDPESeitenfalten-Beutel orange fluoreszierend eingefärbt - mit Antistatikum - ohne Gleitmittel und Slip - mit Heissprägedruck - mit jeweils 150 mm eingelegter Seitenfalte - 10.0162.500 St. 700690100µ
LDPEFlachbeutel natur transparent - mit Gleitmittel - S.Schweissung - 1A Ware - 10.0127.500 St. 235280180µ
LDPERundbodenbeutel natur transparent - mit Gleitmittel - Durchmesser 320 mm - aufgestellte Höhe 600 mm - 76.5091.750 St. 51563050µ
LDPESeitenfalten-Beutel natur transparent - mit Antistatikum - mit je 275 mm eingelegter Seitenfalte - Spez. Oberflächenwiderstand 10 hoch 10 Square Ohm - S.Schweissung - 76.784550 St. 1.3001.00090µ
For all other inquirys, please use our
More information can be found on our FAQ pages.
Or use our keyword search. Here you can search for any term.

Polymer Synthese Werk 

D-47495 Rheinberg

You can also find us here:

Logos Jubi_Eco_PRS